Aged and New Pickguards for Tele*

CLICK HERE FOR STRAT & BASS PICKGUARDS

CLICK HERE FOR TUNERS FOR STRAT/TELE

Rare and hard to find parts.....

Monster Relic representing the first introduction of the three-ply pickguard design (in both ivory and mint green), this is cut from the period-correct eleven-hole template with wide bevel, buffed matt finish, truss scoop (with added years of truss rod alteration markings), and aging in all the areas you would expect - slight warpage, superficial playing marks, discolouration and wear around the pickup, switch and other holes.

Cut from the vintage eleven-hole template this scratchplate will fit directly onto original vintage guitars, as well as more modern reissues and USA/Mexican Fender Stratocasters.

Our pickguards are professionally reliced official licensed replacement parts, or cut from original US templates. These offer the most accurate possible reproduction of the 1950s and 1960s (pre-CBS and CBS-era) pickguards, with our catalogue covering all of the major different iterations, types, and styles released during these periods down to the minutest detail: mounting hole positions, plastic (and ply) thickness, truss rod scoop wear and bevel width.


CLICK HERE FOR CURRENCY CONVERTER

 

60's 3-Ply Aged White Pickguard

Authentic Aged White 60's Pickguard Wide bevel, slight warpage, superficial cracks, dirt in screw holes and pickup holes, truss scoop and buffed finish. Cut from US template will fit USA reissue, mexican and vintage guitars. This guard is based around the features found on old guards. 3 ply mint/black/mint 11 hole guard 0.095”(2.4mm) in thickness. Buffed finish, truss scoop, wide bevel, warpage, cracks and aging around bevel and screw holes. The classic nitro 'Vibe' guard. Made from plastic.

Our authentic 1960s white Telecaster scratchplate (alongside the same pickguard in mint) is three ply white/black/white and a vintage-correct 2.4mm (0.095") thick. Relicing features age-related wear, superficial scratches and cracks, minor warpage, truss scoop and wide bevel.

Cut from the US 8-hole template this scratchplate will fit any American or Mexican Fender Telecasters (including reissues) as well as original '60s-onwards vintage Telecasters.

-Style: Three-Ply (White / Black / White)
-Era: 1960s onwards
-Colour: White
-Holes: 8 Holes
-Thickness: 2.4mm (0.095")
-Compatible with: Pre-CBS & CBS Fender Telecasters*


£55.95

 

 

 

 

 

 

 

 

 

 

 

60's 3-Ply Aged Mint Green Pickguard

Aged 60's Greennish Pickguard Authentic Heavy Aged White 60's Tele* Pickguard Wide bevel, slight warpage, superficial cracks, dirt in screw holes and pickup holes, truss scoop and buffed finish. Cut from US template will fit USA reissue, mexican and vintage guitars. This guard is based around the features found on old guards. 3 ply mint/black/mint 11 hole guard 0.095”(2.4mm) in thickness. Buffed finish, truss scoop, wide bevel, warpage, cracks and aging around bevel and screw holes. The classic nitro 'Vibe' guard. Made from plastic.

£55.95

 

 

 

 

 

 

52-54 Black real Bakelite Pickguard

A very, very rare and sought-after pickguard, this is cut from genuine black bakelite and is 1.5mm (0.06") thick as were found on the very first Telecasters to leave the Fender Fullerton factory back at the beginning of the 1950s in the form of the famous blackguard. Any Telecaster up until 1956 carried this Bakelite scratchplate (before being replaced with a white scratchplate as standard from 1956).

Includes a 5" Nitro can ring to the rear (as has popularly been found on the original guitars) and includes the superficial wearing, scuffs and rust markings you would expect to find on a scratchplate of this vintage.

Cut for the original vintage five-hole arrangement this will fit original instruments as well as Fender's American and Mexican 1950s reissue guitars.

-Style: Genuine Bakelite
-Era: early '50s (1952 - 1954)
-Colour: Black
-Holes: 5 Holes
-Thickness: 1.5mm (0.06")

£69.00

 

 

 

 

 

 

50s Black Bakelite Scratchplate for Esquire *

A direct evolution of the Fender Broadcaster, the Esquire was a short-lived run of single-pickup guitars produced by Fender in Fullerton at the end of the 1940s and beginning of the '50s before being replaced completely by the Telecaster.

A very rare and sought-after pickguard, this is cut from genuine black bakelite and is 1.5mm (0.06") thick as was originally found on these vintage Esquires. As an option the Esquire was also available with a white guard (as seen on the original Broadcaster).

Aging includes the superficial wearing, scuffs and rust markings you would expect to find on a scratchplate of this vintage.

Cut for the original vintage five-hole arrangement this will fit original instruments as well as retro-fit onto Fender's American and Mexican 1950s reissue Telecasters*

£65.00

 

 

 

 

 

 

50s White Aged Pickguard for Esquire*

A direct evolution of the Fender Broadcaster, the Esquire was a short-lived run of single-pickup guitars produced by Fender in Fullerton at the end of the 1940s and beginning of the '50s before being replaced completely by the Telecaster.

This is cut from buffed white plastic to accurately replicate the original white bakelite used and is 1.5mm (0.06") thick as was originally found on these vintage Esquires. Although the Esquire was predominantly built with a black bakelite scratchplate, white is often the more sought-after option allowing relic guitar builders the chance to rebuild Leo Fender's famous broadcaster as well as the Esquires that closely followed.

Aging includes the superficial wearing, scuffs and rust markings you would expect to find on a scratchplate of this vintage.

Cut for the original vintage five-hole arrangement this will fit original instruments as well as retro-fit onto Fender's American and Mexican 1950s reissue Telecasters.

-Style: Single-Ply (Esquire)
-Era: early '50s
-Colour: White
-Holes: 5 Holes
-Thickness: 1.5mm (0.06")
-Compatible with: Pre-CBS Fender Esquires & Telecasters (Esquire conversion)*

£49.00

 

 

 

 

 

 

 

 

 

50's Aged White Tele* Pickguard

50's style aged 1-Layer Pickguard

£45.00

 

 

 

68/69' White Aged Telepickguard Pearl Back

68/69' Style Perloid Back Tele* Pickguard aged

£69.00

 

 

 

60's Greenish T-Style Pickguard new

60's T-Style Pickguard Greenish

£15.00

 

 

 

Esquire White 1-Layer Guard New

White 1-Layer Esquire* Pickguard

£15.00

 

 

 

Aged Pickguard Screws

Set of 18 Monster Relic -Aged

£6.00

 

 

Monster Relic SRV Series Pickguard Sets

CLICK HERE FOR STRAT & BASS PICKGUARDS>

TUNERS FOR STRAT/TELE>

More Next Page >

* Gibson® and Les Paul® are registered trademarks of GMI International. Fender®, Strat®, Stratocaster®, Relic®, Tele®, and Telecaster® are registered trademarks of Fender Musical Instruments Corp. Kluson is a registered trademark of W.D. Music Inc . Croxguitars are in no way affilated with these companies in any way. We use the names to show which parts are suitable for use with specific guitars. Parts offered are for restoration or upgrade of OEM guitars only. See our terms & conditions for full disclaimer.

 

About Us | Terms & Conditions | Privacy Policy | Contact Us | ©2010 Crox Guitars